With quality being our prime motto, we are engaged in manufacturing and supplying a comprehensive range of Blow Molding Machines.
These Blow Molding Machines provide uniform thickness within few seconds as these are facilitated with a resin ram accumulator and one-stage precision control. These are extensively used for molding, pallets, jerry cans drums from 5 liters up to 100 liters. This range of Molding Machines are offered either single or double station blow molding with or without deflashing systems.
Furthermore, these machines have display of the open construction easy to read because of single console which is updated with electronic processing & safety controls.
|Max. Product volume||160 liters|
|Output capacities||18~25 pcs/h|
|Screw diameter||120 mm|
|Screw L/D ratio||28 L/D|
|Screw drive power||75 KW|
|Screw heating capacity||30 KW|
|No.of heating zone||5 zones|
|Output of HDPE||240 KG/H|
|Oil pump drive power||45 KW|
|Clamping force||800 KN|
|Max.size of mold||1000X1500mm|
|Max.die diameter||520 mm|
|Die heating power||12 KW|
|Die heating segments||5 zones|
|Blowing pressure||0.8 mpa|
|Air volume||1.6 M³/MIN|
|Cooling water pressure||0.3 mpa|
|Water consumption||180 L/MIN|